Slika:Elmer-pump-heatequation.png

Izvorna datoteka(1.200 × 939 točk, velikost datoteke: 536 KB, MIME-vrsta: image/png)


Povzetek

Solution to the heat equation in a pump casing model using the finite elment modelling software Elmer. The mesh is intentionally quite coarse for presentation purposes. The equation solved is given by the following elmer input file. Geometery is distributed with elmer as pump_carter_sup.stp

Header
  CHECK KEYWORDS Warn
  Mesh DB "." "."
  Include Path ""
  Results Directory ""
End

Simulation
  Max Output Level = 4
  Coordinate System = Cartesian
  Coordinate Mapping(3) = 2 4 6
  Simulation Type = Steady state
  Steady State Max Iterations = 1
  Output Intervals = 1
  Timestepping Method = BDF
  BDF Order = 1
  Solver Input File = case.sif
  Post File = case.ep
End

Constants
  Gravity(4) = 0 -1 0 9.82
  Stefan Boltzmann = 5.67e-08
  Permittivity of Vacuum = 8.8542e-12
  Boltzmann Constant = 1.3807e-23
  Unit Charge = 1.502e-19
End

Body 1
  Target Bodies(1) = 1
  Name = "Body Property 1"
  Equation = 1
  Material = 1
  Body Force = 6
End

Solver 1
  Equation = Heat Equation
  Variable = -dofs 1 Temperature
  Procedure = "HeatSolve" "HeatSolver"
  Exec Solver = Always
  Stabilize = True
  Bubbles = False
  Lumped Mass Matrix = False
  Optimize Bandwidth = True
  Steady State Convergence Tolerance = 1.0e-5
  Nonlinear System Convergence Tolerance = 1.0e-8
  Nonlinear System Max Iterations = 20
  Nonlinear System Newton After Iterations = 3
  Nonlinear System Newton After Tolerance = 1.0e-3
  Nonlinear System Relaxation Factor = 1
  Linear System Solver = Iterative
  Linear System Iterative Method = BiCGStab
  Linear System Max Iterations = 500
  Linear System Convergence Tolerance = 1.0e-8
  Linear System Preconditioning = ILU0
  Linear System ILUT Tolerance = 1.0e-3
  Linear System Abort Not Converged = False
  Linear System Residual Output = 1
  Linear System Precondition Recompute = 1
End

Equation 1
  Name = "Equation 1"
  Active Solvers(1) = 1
End

Material 1
  Name = "Steel (alloy - generic)"
  Poisson ratio = 0.285
  Heat expansion Coefficient = 12.0e-6
  Youngs modulus = 200.0e9
  Heat Conductivity = 37.2
  Sound speed = 5100.0
  Heat Capacity = 976.0
  Mesh Poisson ratio = 0.285
  Density = 7850.0
  Poisson ratio = 0.287
  Youngs modulus = 200.0e9
End

Body Force 1
  Name = "BodyForce 1"
  Heat Source = 0.05
End

Boundary Condition 1
  Target Boundaries(1) = 57
  Name = "BoundaryCondition 1"
  Temperature = 293
End

Licenca

Jaz, imetnik avtorskih pravic na tem delu, ga s tem objavljam pod naslednjimi licencami:
w:sl:Creative Commons
priznanje avtorstva deljenje pod enakimi pogoji
Dovoljeno vam je:
  • deljenje – reproducirati, distribuirati in javno priobčevati delo
  • predelava – predelati delo
Pod naslednjimi pogoji:
  • priznanje avtorstva – Navesti morate ustrezno avtorstvo, povezavo do licence in morebitne spremembe. To lahko storite na kakršen koli primeren način, vendar ne na način, ki bi nakazoval, da dajalec licence podpira vas ali vašo uporabo dela.
  • deljenje pod enakimi pogoji – Če boste to vsebino predelali, preoblikovali ali uporabili kot izhodišče za drugo delo, morate svoj prispevek distribuirati pod enako ali združljivo licenco, kot jo ima izvirnik.
GNU head Ta dokument je dovoljeno kopirati, razširjati in/ali spreminjati pod pogoji Licence GNU za prosto dokumentacijo, različica 1.2 ali katera koli poznejša, ki jo je objavila ustanova Free Software Foundation; brez nespremenljivih delov ter brez besedil na sprednji ali zadnji platnici. Kopija licence je vključena v razdelek Licenca GNU za prosto dokumentacijo.
Izberete lahko licenco po svoji izbiri.

Napisi

Dodajte enovrstični opis, kaj ta datoteka predstavlja

Predmeti, prikazani v tej datoteki

motiv

image/png

Zgodovina datoteke

Kliknite datum in čas za ogled datoteke, ki je bila takrat naložena.

Datum in časSličicaVelikostUporabnikKomentar
trenutno20:39, 2. junij 2010Sličica za različico z datumom 20:39, 2. junij 20101.200 × 939 (536 KB)User A1Crop white border
20:20, 2. junij 2010Sličica za različico z datumom 20:20, 2. junij 20101.674 × 941 (556 KB)User A1Solution to the heat equation in a pump casing model using the finite elment modelling software Elmer.

Datoteka je del naslednje 1 strani slovenske Wikipedije (strani drugih projektov niso navedene):

Globalna uporaba datoteke

To datoteko uporabljajo tudi naslednji vikiji:

Oglejte si globalno uporabo te datoteke.