Ta slika je bila naložena v formatu JPEG, čeprav sestoji iz nefotografskih podatkov. Te informacije bi bile bolj učinkovito ali natančno shranjene v formatu PNG ali SVG. Če je mogoče, naložite različico PNG ali SVG te slike brez artefaktov stiskanja, izpeljanih iz ne-JPEG vira (ali z odstranjenimi obstoječimi artefakti). Ko boste to storili, označite JPEG različico z {{Superseded|NewImage.ext}} in to oznako odstranite.. Ta oznaka naj se ne uporablja za fotografije ali preslikave. Za več informacij glejte {{BadJPEG}}.

 

Ta slika je bila ustvarjena z Blender.

Datoteka je objavljena pod licenco Creative Commons Priznanje avtorstva-Deljenje pod enakimi pogoji 2.5 Generična.

Dovoljeno vam je:

• deljenje – reproducirati, distribuirati in javno priobčevati delo
• predelava – predelati delo

Pod naslednjimi pogoji:

• priznanje avtorstva – Navesti morate ustrezno avtorstvo, povezavo do licence in morebitne spremembe. To lahko storite na kakršen koli primeren način, vendar ne na način, ki bi nakazoval, da dajalec licence podpira vas ali vašo uporabo dela.
• deljenje pod enakimi pogoji – Če boste to vsebino predelali, preoblikovali ali uporabili kot izhodišče za drugo delo, morate svoj prispevek distribuirati pod enako ali združljivo licenco, kot jo ima izvirnik.

https://creativecommons.org/licenses/by-sa/2.5CC BY-SA 2.5 Creative Commons Attribution-Share Alike 2.5 truetrue

code

Perhaps you grab the source from the "edit" page without the wikiformating.

GNU R

This creates the paths and saves them into textfiles that can be read by blender. There are also paths for BMs on a torus.

# calculate a Brownian motion on the sphere; the output is a list
# consisting of:
# Z ... BM on the sphere
# Y ... tangential BM, see Price&Williams
# b ... independent 1D BM (see Price & Williams)
# B ... generating 3D BM
# n ... number of time-steps in the discretization
# T ... the above processes are given on a uniform mesh of size
#       n on [0,T]
euler = function(x0, T, n) {
  # initialize objects
  dt = T/(n-1);
  dB = matrix(rep(0,3*(n-1)),ncol=3, nrow=n-1);
  dB[,1] = rnorm(n-1, 0, sqrt(dt));
  dB[,2] = rnorm(n-1, 0, sqrt(dt));
  dB[,3] = rnorm(n-1, 0, sqrt(dt));
  Z = matrix(rep(0,3*n), ncol=3, nrow=n);
  dZ = matrix(rep(0,3*(n-1)), ncol=3, nrow=n-1);
  Y = matrix(rep(0,3*n), ncol=3, nrow=n);
  B = matrix(rep(0,3*n), ncol=3, nrow=n);
  b = rep(0, n);
  Z[1,] = x0;

  #do the computation
  for(k in 2:n){
    B[k,] = B[k-1,] + dB[k-1,];
    dZ[k-1,] = cross(Z[k-1,],dB[k-1,]) - Z[k-1,]*dt;
    Z[k,] = Z[k-1,] + dZ[k-1,];
    Y[k,] = Y[k-1,] - cross(Z[k-1,],dZ[k-1,]);
    b[k] = b[k-1] + dot(Z[k-1,],dB[k-1,]);
  }
  return(list(Z = Z, Y = Y, b = b, B = B, n = n, T = T));
}

# write the output from euler in csv-files
euler.write = function(bms, files=c("Z.csv","Y.csv","b.csv","B.csv"),steps=bms$n){
  bigsteps=round(seq(1,bms$n,length=steps))
  write.table(bms$Z[bigsteps,],file=files[1],col.names=F,row.names=F,sep=",",dec=".");
  write.table(bms$Y[bigsteps,],file=files[2],col.names=F,row.names=F,sep=",",dec=".");
  write.table(bms$b[bigsteps],file=files[3],col.names=F,row.names=F,sep=",",dec=".");
  write.table(bms$B[bigsteps,],file=files[4],col.names=F,row.names=F,sep=",",dec=".");
}

# calculate a Brownian motion on a 3-d torus with outer
# radius R and inner radius r
eulerTorus = function(x0, r, R, t, n) {
  # initialize objects
  dt = t/(n-1);
  dB = matrix(rep(0,3*(n-1)),ncol=3, nrow=n-1);
  dB[,1] = rnorm(n-1, 0, sqrt(dt));
  dB[,2] = rnorm(n-1, 0, sqrt(dt));
  dB[,3] = rnorm(n-1, 0, sqrt(dt));
  Z = matrix(rep(0,3*n), ncol=3, nrow=n);
  B = matrix(rep(0,3*n), ncol=3, nrow=n);
  dZ = matrix(rep(0,3*(n-1)), ncol=3, nrow=n-1);
  Z[1,] = x0;
  nT = rep(0,3);

  #do the computation
  for(k in 2:n){
    B[k,] = B[k-1,] + dB[k-1,];
    nT = nTorus(Z[k-1,],r,R);
    dZ[k-1,] = cross(nT, dB[k-1,]) + HTorus(Z[k-1,],r,R)*nT*dt;
    Z[k,] = Z[k-1,] + dZ[k-1,];
  }
  return(list(Z = Z, B = B, n = n, t = t));
}

# write the output from euler in csv-files
torus.write = function(bmt, files=c("tZ.csv","tB.csv"),steps=bmt$n){
  bigsteps=round(seq(1,bmt$n,length=steps))
  write.table(bmt$Z[bigsteps,],file=files[1],col.names=F,row.names=F,sep=",",dec=".");
  write.table(bmt$B[bigsteps,],file=files[2],col.names=F,row.names=F,sep=",",dec=".");
}

# "defining" function of a torus
fTorus = function(x,r,R){
  return((x[1]^2+x[2]^2+x[3]^2+R^2-r^2)^2 - 4*R^2*(x[1]^2+x[2]^2));
}

# normal vector of a 3-d torus with outer radius R and inner radius r
nTorus = function(x, r, R) {
  c1 = x[1]*(x[1]^2+x[2]^2+x[3]^2-R^2-r^2)/(3*x[1]^4*x[2]^2+3*x[3]^4*x[2]^2
    +3*x[3]^4*x[1]^2+6*x[3]^2*x[1]^2*x[2]^2+3*x[1]^2*x[2]^4+3*x[3]^2*x[2]^4
    -2*x[3]^2*R^2*r^2-4*x[1]^2*x[2]^2*R^2+x[1]^6+x[2]^6+x[3]^6+3*x[3]^2*x[1]^4
    -4*x[1]^2*x[2]^2*r^2-4*x[1]^2*x[3]^2*r^2+2*R^2*x[1]^2*r^2
    -4*x[2]^2*x[3]^2*r^2+2*R^2*x[2]^2*r^2-2*x[1]^4*R^2-2*x[1]^4*r^2
    +R^4*x[1]^2+x[1]^2*r^4-2*x[2]^4*R^2-2*x[2]^4*r^2+R^4*x[2]^2+x[2]^2*r^4
    +x[3]^2*R^4+x[3]^2*r^4-2*x[3]^4*r^2+2*x[3]^4*R^2)^(1/2);
  c2 = x[2]*(x[1]^2+x[2]^2+x[3]^2-R^2-r^2)/(3*x[1]^4*x[2]^2+3*x[3]^4*x[2]^2
    +3*x[3]^4*x[1]^2+6*x[3]^2*x[1]^2*x[2]^2+3*x[1]^2*x[2]^4+3*x[3]^2*x[2]^4
    -2*x[3]^2*R^2*r^2-4*x[1]^2*x[2]^2*R^2+x[1]^6+x[2]^6+x[3]^6
    +3*x[3]^2*x[1]^4-4*x[1]^2*x[2]^2*r^2-4*x[1]^2*x[3]^2*r^2+2*R^2*x[1]^2*r^2
    -4*x[2]^2*x[3]^2*r^2+2*R^2*x[2]^2*r^2-2*x[1]^4*R^2-2*x[1]^4*r^2+R^4*x[1]^2
    +x[1]^2*r^4-2*x[2]^4*R^2-2*x[2]^4*r^2+R^4*x[2]^2+x[2]^2*r^4+x[3]^2*R^4
    +x[3]^2*r^4-2*x[3]^4*r^2+2*x[3]^4*R^2)^(1/2);
  c3 = (x[1]^2+x[2]^2+x[3]^2+R^2-r^2)*x[3]/(3*x[1]^4*x[2]^2+3*x[3]^4*x[2]^2
                                            +3*x[3]^4*x[1]^2
                                            +6*x[3]^2*x[1]^2*x[2]^2
                                            +3*x[1]^2*x[2]^4+3*x[3]^2*x[2]^4
                                            -2*x[3]^2*R^2*r^2
                                            -4*x[1]^2*x[2]^2*R^2+x[1]^6
                                            +x[2]^6+x[3]^6+3*x[3]^2*x[1]^4
                                            -4*x[1]^2*x[2]^2*r^2
                                            -4*x[1]^2*x[3]^2*r^2
                                            +2*R^2*x[1]^2*r^2
                                            -4*x[2]^2*x[3]^2*r^2
                                            +2*R^2*x[2]^2*r^2-2*x[1]^4*R^2
                                            -2*x[1]^4*r^2+R^4*x[1]^2
                                            +x[1]^2*r^4-2*x[2]^4*R^2
                                            -2*x[2]^4*r^2+R^4*x[2]^2
                                            +x[2]^2*r^4+x[3]^2*R^4
                                            +x[3]^2*r^4-2*x[3]^4*r^2
                                            +2*x[3]^4*R^2)^(1/2);
  return(c(c1,c2,c3));
}

# mean curvature of a 3-d torus with outer radius R and inner radius r
HTorus = function(x, r, R){
  return( -(3*x[1]^4*r^4+4*x[2]^6*x[3]^2+4*x[1]^6*x[2]^2-3*x[2]^4*x[3]^2*R^2
            -2*x[1]^6*R^2+4*x[1]^2*x[3]^6+x[3]^6*R^2+4*x[2]^4*R^2*r^2-x[1]^2*r^6
            -x[2]^2*r^6+x[2]^4*R^4+4*x[2]^2*x[3]^2*R^4+6*x[2]^2*x[3]^2*r^4
            -2*x[1]^2*R^2*r^4-x[1]^2*R^4*r^2-9*x[1]^4*x[2]^2*r^2
            -9*x[1]^4*x[3]^2*r^2+4*x[1]^4*R^2*r^2+12*x[1]^2*x[3]^4*x[2]^2
            -3*x[2]^6*r^2+4*x[1]^6*x[3]^2+3*x[3]^4*r^4-x[3]^4*R^4
            -9*x[2]^4*x[3]^2*r^2+2*x[2]^2*x[3]^2*R^2*r^2+4*x[1]^2*x[2]^6
            -6*x[1]^2*x[3]^2*x[2]^2*R^2-x[3]^2*r^6+6*x[2]^4*x[3]^4+x[3]^8
            +x[1]^8+x[2]^8-3*x[1]^6*r^2+6*x[1]^4*x[3]^4+12*x[1]^2*x[3]^2*x[2]^4
            -6*x[1]^2*x[2]^4*R^2-2*x[3]^4*R^2*r^2-2*x[2]^2*R^2*r^4-x[2]^2*R^4*r^2
            -9*x[2]^2*x[3]^4*r^2+x[3]^2*R^2*r^4+x[3]^2*R^4*r^2-9*x[1]^2*x[2]^4*r^2
            +2*x[1]^2*R^4*x[2]^2+6*x[1]^2*x[2]^2*r^4-3*x[1]^4*x[3]^2*R^2
            -6*x[1]^4*x[2]^2*R^2+4*x[1]^2*x[3]^2*R^4+6*x[1]^2*x[3]^2*r^4
            -9*x[1]^2*x[3]^4*r^2+8*x[1]^2*R^2*x[2]^2*r^2+2*x[1]^2*x[3]^2*R^2*r^2
            +x[1]^4*R^4-3*x[3]^6*r^2-2*x[2]^6*R^2+6*x[1]^4*x[2]^4-x[3]^2*R^6
            -18*x[1]^2*x[2]^2*x[3]^2*r^2+4*x[2]^2*x[3]^6+12*x[1]^4*x[3]^2*x[2]^2
            +3*x[2]^4*r^4)/(3*x[1]^4*x[2]^2+3*x[3]^4*x[2]^2+3*x[3]^4*x[1]^2
                            +6*x[3]^2*x[1]^2*x[2]^2+3*x[1]^2*x[2]^4+3*x[3]^2*x[2]^4
                            -2*x[3]^2*R^2*r^2-4*x[1]^2*x[2]^2*R^2+x[1]^6+x[2]^6
                            +x[3]^6+3*x[3]^2*x[1]^4-4*x[1]^2*x[2]^2*r^2
                            -4*x[1]^2*x[3]^2*r^2+2*R^2*x[1]^2*r^2
                            -4*x[2]^2*x[3]^2*r^2+2*R^2*x[2]^2*r^2-2*x[1]^4*R^2
                            -2*x[1]^4*r^2+R^4*x[1]^2+x[1]^2*r^4-2*x[2]^4*R^2
                            -2*x[2]^4*r^2+R^4*x[2]^2+x[2]^2*r^4+x[3]^2*R^4
                            +x[3]^2*r^4-2*x[3]^4*r^2+2*x[3]^4*R^2)^(3/2));
}

# calculate the cross product of the two 3-dim vectors
# x and y. No argument-checking for performance reasons
cross = function(x,y){
  res = rep(0,3);
  res[1] = x[2]*y[3] - x[3]*y[2];
  res[2] = -x[1]*y[3] + x[3]*y[1];
  res[3] = x[1]*y[2] - x[2]*y[1];
  return(res);
}

# calculate the inner product of two vectors of dim 3
# returns a number, not a 1x1-matrix!
dot = function(x,y){
  return(sum(x*y));
}

# calculate the cross product of the two 3-dim vectors
# x and y. No argument-checking for performance reasons
cross = function(x,y){
  res = rep(0,3);
  res[1] = x[2]*y[3] - x[3]*y[2];
  res[2] = -x[1]*y[3] + x[3]*y[1];
  res[3] = x[1]*y[2] - x[2]*y[1];
  return(res);
}

#############
### main-teil
set.seed(280180)
et=eulerTorus(c(3,0,0),3,5,19,10000)
torus.write(et,steps=9000)
#
#bms=euler(c(1,0,0),4,70000)
#euler.write(bms,steps=10000)

blender3d

The blender (python) code to create a image that looks almost like this one. Play around...

## import data from matlab-text-file and draw BM on the S^2

## (c) 2007 by Christan Bayer and Thomas Steiner

from Blender import Curve, Object, Scene, Window, BezTriple, Mesh, Material, Camera,
World
from math import *

##import der BM auf der Kugel aus einem csv-file
def importcurve(inpath="Z.csv"):
        infile = open(inpath,'r')
        lines = infile.readlines()
        vec=[]
        for i in lines:
                li=i.split(',')
                vec.append([float(li[0]),float(li[1]),float(li[2].strip())])
        infile.close()
        return(vec)

##function um aus einem vektor (mit den x,y,z Koordinaten) eine Kurve zu machen
def vec2Cur(curPts,name="BMonSphere"):
        bztr=[]
        bztr.append(BezTriple.New(curPts[0]))
        bztr[0].handleTypes=(BezTriple.HandleTypes.VECT,BezTriple.HandleTypes.VECT)
        cur=Curve.New(name) ##TODO wenn es das Objekt schon gibt, dann nicht neu erzeugen
        cur.appendNurb(bztr[0])
        for i in range(1,len(curPts)):
                bztr.append(BezTriple.New(curPts[i]))
                bztr[i].handleTypes=(BezTriple.HandleTypes.VECT,BezTriple.HandleTypes.VECT)
                cur[0].append(bztr[i])
        return( cur )

#erzeugt einen kreis, der später die BM umgibt (liegt in y-z-Ebene)
def circle(r,name="tubus"):
        bzcir=[]
        bzcir.append(BezTriple.New(0.,-r,-4./3.*r, 0.,-r,0., 0.,-r,4./3.*r))
        bzcir[0].handleTypes=(BezTriple.HandleTypes.FREE,BezTriple.HandleTypes.FREE)
        cur=Curve.New(name) ##TODO wenn es das Objekt schon gibt, dann nicht neu erzeugen
        cur.appendNurb(bzcir[0])
        #jetzt alle weietren pkte
        bzcir.append(BezTriple.New(0.,r,4./3.*r, 0.,r,0., 0.,r,-4./3.*r))
        bzcir[1].handleTypes=(BezTriple.HandleTypes.FREE,BezTriple.HandleTypes.FREE)
        cur[0].append(bzcir[1])
        bzcir.append(BezTriple.New(0.,-r,-4./3.*r, 0.,-r,0., 0.,-r,4./3.*r))
        bzcir[2].handleTypes=(BezTriple.HandleTypes.FREE,BezTriple.HandleTypes.FREE)
        cur[0].append(bzcir[2])
        return ( cur )

#erzeuge mit skript eine (glas)kugel (UVSphere)
def sphGlass(r=1.0,name="Glaskugel",n=40,smooth=0):
        glass=Mesh.New(name) ##TODO wenn es das Objekt schon gibt, dann nicht neu erzeugen
        for i in range(0,n):
                for j in range(0,n):
                        x=sin(j*pi*2.0/(n-1))*cos(-pi/2.0+i*pi/(n-1))*1.0*r
                        y=cos(j*pi*2.0/(n-1))*(cos(-pi/2.0+i*pi/(n-1)))*1.0*r
                        z=sin(-pi/2.0+i*pi/(n-1))*1.0*r
                        glass.verts.extend(x,y,z)
        for i in range(0,n-1): 
                for j in range(0,n-1):
                        glass.faces.extend([i*n+j,i*n+j+1,(i+1)*n+j+1,(i+1)*n+j])
                        glass.faces[i*(n-1)+j].smooth=1
        return( glass )

def torus(r=0.3,R=1.4): 
        krGro=circle(r=R,name="grTorusKreis")
        

#jetzt das material ändern
def verglasen(mesh):
        matGlass = Material.New("glas") ##TODO wenn es das Objekt schon gibt, dann nicht
neu erzeugen
        #matGlass.setSpecShader(0.6)
        matGlass.setHardness(30) #für spec: 30
        matGlass.setRayMirr(0.15)
        matGlass.setFresnelMirr(4.9)
        matGlass.setFresnelMirrFac(1.8)
        matGlass.setIOR(1.52)
        matGlass.setFresnelTrans(3.9)
        matGlass.setSpecTransp(2.7)
        #glass.materials.setSpecTransp(1.0)
        matGlass.rgbCol = [0.66, 0.81, 0.85]
        matGlass.mode |= Material.Modes.ZTRANSP
        matGlass.mode |= Material.Modes.RAYTRANSP
        #matGlass.mode |= Material.Modes.RAYMIRROR
        mesh.materials=[matGlass]
        return ( mesh )

def maleBM(mesh):
        matDraht = Material.New("roterDraht") ##TODO wenn es das Objekt schon gibt, dann
nicht neu erzeugen
        matDraht.rgbCol = [1.0, 0.1, 0.1]
        mesh.materials=[matDraht]
        return( mesh )

#eine solide Mesh-Ebene (Quader)
# auf der höhe ebh, dicke d, seitenlänge (quadratisch) 2*gr
def ebene(ebh=-2.5,d=0.1,gr=6.0,name="Schattenebene"):
        quader=Mesh.New(name) ##TODO wenn es das Objekt schon gibt, dann nicht neu erzeugen
        #obere ebene
        quader.verts.extend(gr,gr,ebh)
        quader.verts.extend(-gr,gr,ebh)
        quader.verts.extend(-gr,-gr,ebh)
        quader.verts.extend(gr,-gr,ebh)
        #untere ebene
        quader.verts.extend(gr,gr,ebh-d)
        quader.verts.extend(-gr,gr,ebh-d)
        quader.verts.extend(-gr,-gr,ebh-d)
        quader.verts.extend(gr,-gr,ebh-d)
        quader.faces.extend([0,1,2,3])
        quader.faces.extend([0,4,5,1])
        quader.faces.extend([1,5,6,2])
        quader.faces.extend([2,6,7,3])
        quader.faces.extend([3,7,4,0])
        quader.faces.extend([4,7,6,5])
        #die ebene einfärben
        matEb = Material.New("ebenen_material") ##TODO wenn es das Objekt schon gibt, dann
nicht neu erzeugen
        matEb.rgbCol = [0.53, 0.51, 0.31]
        matEb.mode |= Material.Modes.TRANSPSHADOW
        matEb.mode |= Material.Modes.ZTRANSP
        quader.materials=[matEb]
        return (quader)

###################
#### main-teil ####

# wechsel in den edit-mode
editmode = Window.EditMode()
if editmode: Window.EditMode(0)

dataBMS=importcurve("C:/Dokumente und Einstellungen/thire/Desktop/bmsphere/Z.csv")
#dataBMS=importcurve("H:\MyDocs\sphere\Z.csv")
BMScur=vec2Cur(dataBMS,"BMname")
#dataStereo=importcurve("H:\MyDocs\sphere\stZ.csv")
#stereoCur=vec2Cur(dataStereo,"SterName")

cir=circle(r=0.01)

glass=sphGlass()
glass=verglasen(glass)
ebe=ebene()

#jetzt alles hinzufügen
scn=Scene.GetCurrent()
obBMScur=scn.objects.new(BMScur,"BMonSphere")
obcir=scn.objects.new(cir,"round")
obgla=scn.objects.new(glass,"Glaskugel")
obebe=scn.objects.new(ebe,"Ebene")
#obStereo=scn.objects.new(stereoCur,"StereoCurObj")

BMScur.setBevOb(obcir)
BMScur.update()
BMScur=maleBM(BMScur)

#stereoCur.setBevOb(obcir)
#stereoCur.update()

cam = Object.Get("Camera") 
#cam.setLocation(-5., 5.5, 2.9) 
#cam.setEuler(62.0,-1.,222.6)
#alternativ, besser??
cam.setLocation(-3.3, 8.4, 1.7) 
cam.setEuler(74,0,200)

world=World.GetCurrent()
world.setZen([0.81,0.82,0.61])
world.setHor([0.77,0.85,0.66])

if editmode: Window.EditMode(1)  # optional, zurück n den letzten modus

        
#ergebnis von
#set.seed(24112000)
#sbm=euler(c(0,0,-1),T=1.5,n=5000)
#euler.write(sbm)